Drill / Saw Lines
| ACDM Beam Drilling Line The ACDM Beam Drilling Line has a unique space saving design were the steel remains stationary and the heavy duty bridge with the drilling spindles moves along the material. This beam drilling line can process I beam, channel, flat bar, angles, tubes and pipes up to 16m long. A bandsaw can be fitted in line with system that automatically loads the cut material to the drill, this system has the advantage of simultaneous sawing and drilling operation and independent sawing and drilling operation. Click Here to see the video |
| Steelex Structural Steel Drilling and Sawing Systems Shown here are our Beam Drilling / Sawing Lines for processing I beam, flat bar, channel, angle, box section and pipe and we offer two ranges as follows; Manufactured in Italy all machines have ball screw feeds for high drilling feeds with carbide drills and are CE marked. The user friendly Windows XP based control system will accept information in DSTV/DXF/CAM format from you CAD / detailing software for programming the machine by pressing one key. |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| Please be patient as all the videos are large so may take some time to start to play or download, right click to download. Some of the pictures show the machines without the gurads fitted for demonstration purposes only. |
 |
| |
 |
Tel : +442081233824 Fax : +442071171993 Email Us |
| www.steelexinternational.net www.steelexcentralasia.com Telephone +442081233824 If you would like more information on these Beam Drilling Lines then please email us or use our contact form Copyright Steelex International Ltd All rights reserved. |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
- ACDM - Single or Three Spindles, up to ten tools, 1200mm maximum material width with an option for a bandsaw.
- IM DB - Low cost beam drilling / sawing lines, option of one or two spindles, up to five tools
- IM V400 and T400 - Budget Beam Sawing and Drilling Lines
| ACDM 900-3 |
| ACDM 900-3 with 3 x 3 Position Tool Changer |
| ACDM 900-3 with 3 x 3 Position Tool Changer |
| Tool Changer |
| ACDM 900-1R Spindle in the vertical position for web drilling |
| ACDM 900-1R Spindle in the horizontal position for flange drilling |
| Optional High Speed Engraving System |
| Optional Chip Conveyor |
| IM DB Beam Drilling / Sawing Line The IM DB Beam Drilling / Sawing Line is a low cost system ideal for the smaller steel fabricator. With options of a single rotating spindle or two spindles this machine gives real production at a realistic price. A straight or mitre cutting bandsaw can be installed either back to back or split from the drill. With the Single Rotating Spindle both the web and flange of a beam can be drilled in one setting giving it a significant advantage over other low cost beam drilling lines. This beam drilling line can process I beam, channel, flat bar, angles, tubes and pipes up to and has either a pusher or gripper type measuring device. Click Here to see the video |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Gripper Type Measuring System |
| Pusher Type Measuring System with Friction Roller |
| Mitre Cutting Bandsaw |
| IM DB 421 Mitre Cut Saw and Drill Line |
| Our low cost single spindle beam drilling line as a drilling spindle that can rotate +/- 90 degrees to allow the web and both flanges to be drilled without turning the material unlike many other low cost beam drilling lines (The machine shown in the video has all the guards and safety devices removed for clarity) |
| Budget IM V400 and IM T400 Beam Drilling / Sawing Line The IM V400 and T400 Beam Drilling / Sawing Lines are a budget system ideal for the smaller steel fabricator or as a second line for the large fabricator. With a mono block construction and intergrated roller conveyors of these line are very easy to install. Offered with the option of a single drilling spindle or three drilling spindles these machines give real production at a very low cost and a great entry to automated beam processing. This beam drilling line can process I beam, channel, flat bar, angles, tubes and pipes up to and has a built in roller feed measuring system. Please contact us for more information. |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| IM T 400 Three Spindle Drill Line |
| IM T 400 Three Spindle Drill Line with Bandsaw |
| IM T 400 Three Spindle Drill |
| IM V 400 Single Spindle Drill Line |
| Roller Feed Measuring System |
| IM V400 Single Spindle Drill Line showing Mono Block Construction |
| Built in Italy and CE marked these budget drills can use HSS or high speed carbide drills to give high productivity at a budget cost. Manual tool change with quick release tooling and ball screw feeds on all slides for rapid and precise positioning are included as standard. To see a video of this machine click here |
